- Cut out an appropriate part of the tube.
- Mount the 90° connections and the reduction parts if necessary. (The
connectors of the activator usually come with 1" diameter).
- Connect the hoses to the water tube.
- Now connect the activator to the hoses (but not yet tight!) to find out the
right position of the clamps for fixing the activator on the wall.
- Please watch the direction: Water in: blue, water out: red
- Do never bend the hoses!
- When putting up the clamps keep distance to the end caps of the activator.
- The activator's connectors have to point downwards, whereas the activator
can be mounted sloping.
- After having mounted the clamps and the activator tighten the nuts, but...
- ... take care that you support the screws on the activator's side with a
pipe wrench to avoid twisting of the inner construction of the activator.
- Open the water-supply - and the GIE-activator will supply you with living,
high quality drinking water.
Please don't forget to include the clamps and the needed length of the hoses in
your order. |
|
